|
|
| 當前位置
-> 方管知識－ 鍍鋅方管跟焊接鋼管主要區別
發布時間：(2018/10/31)
|
鍍鋅方管跟焊接鋼管主要區別 |
在設計圖紙中一般采用公稱直徑來表示，公稱直徑是為了設計制造和維修的方便人為地規定的一種標準，也較公稱通徑，是方管（或者管件）的規格名稱。方管的公稱直徑和其內徑、外徑都不相等，例如：公稱直徑為100MM的無縫方管郵102*5、108*5等好幾種，108為方管的外徑，5表示方管的壁厚，因此，該方管的內徑為（108*5-5）＝98MM，但是它不完全等于方管外徑減兩倍壁厚之差，也可以說，公稱直徑是接近于內徑，但是又不等于內徑的一種方管直徑的規格名稱，在設計圖紙中所以要用公稱直徑，目的是為了根據公稱直徑可以確定方管、管件、閥門、法蘭、墊片等結構尺寸與連接尺寸，公稱直徑采用符號DN表示，如果在設計圖紙中采用外徑表示，也應該作出管道規格對照表，表明某種管道的公稱直徑，壁厚。
Nominal diameter is generally used in design drawings to express, nominal diameter is for the convenience of design, manufacture and maintenance of an artificial standard, but also more nominal diameter, pipe (or fittings) specification name. The nominal diameter of the pipe is not equal to its inner diameter and outer diameter. For example, there are several seamless square pipes with nominal diameter of 100MM, such as 102*5, 108*5, 108*5 and so on. 108 are the outer diameter of the pipe and 5 are the wall thickness of the pipe. Therefore, the inner diameter of the square pipe is (108*5-5) = 98MM, but it is not exactly equal to the difference between the outer diameter of the square pipe and the wall thickness reduced by two times. It can be said that the nominal diameter is close to the internal diameter, but not equal to the internal diameter of a pipe diameter specification name, in the design drawings to use nominal diameter, the purpose is to determine the nominal diameter of the pipe, fittings, valves, flanges, gaskets and other structural dimensions and connection size, nominal diameter using the symbol DN It is indicated that if the outer diameter is used in the design drawings, a comparison table of pipe specifications should also be made to indicate the nominal diameter and wall thickness of a pipe.
鍍鋅方管跟焊管主要區別：焊管分為螺旋縫焊和直焊方管，螺旋縫焊方管分為自 動埋弧焊管和高頻焊管，直焊方管又分為普通直焊鋼 管和不銹焊管。無縫方管按制造方法分為熱軋管和冷軋( 拔)管，其精度分為普通和高級兩種。冷軋(拔)管的最大公稱直 徑為200mm，熱軋管最大公稱直徑為600mm。無縫方管還有不銹鋼 無縫方管，不銹鋼無縫方管分為熱軋、熱擠壓不銹鋼無縫方管和冷軋(拔)不銹鋼無縫方管兩種。
The main difference between galvanized square pipe and welded pipe is that the welded pipe is divided into spiral welded pipe and straight welded square pipe, the spiral welded square pipe is divided into automatic submerged arc welding pipe and high frequency welded pipe, and the straight welded square pipe is divided into ordinary straight welded pipe and stainless welded pipe. Seamless square pipes are divided into hot-rolled pipes and cold-rolled (drawn) pipes according to the manufacturing method, and their precision is divided into ordinary and advanced two kinds. The maximum nominal diameter of the cold rolling (drawing) pipe is 200mm, and the maximum nominal diameter of the hot rolled pipe is 600mm. Seamless square pipe and stainless steel seamless square pipe, stainless steel seamless square pipe is divided into hot-rolled, hot-extruded stainless steel seamless square pipe and cold-rolled (drawn) stainless steel seamless square pipe two kinds.
無保護層型有無保護層方管，過去通常叫不鍍鋅方管(黑鐵 管)。質地型方管主要是指不銹鋼無縫方管和不銹鋼焊管 ，在室外大中管道給水上，由于造價、連接等原因未曾推廣應 用過。
There is no protective layer and no protective layer square pipe. In the past, it was usually called galvanized square tube (black iron pipe). The quality square pipe mainly refers to the stainless steel seamless square pipe and stainless steel welded pipe. It has not been popularized and applied in outdoor large and medium-sized pipes for water supply due to cost, connection and other reasons.
保護層型(主要指的是管道內壁)現在有金屬保護層型與非金 屬保護層型，金屬保護層型常用的有表面鍍層保護層型、表 面壓合保護層型。表面鍍層保護層型中常見的是鍍鋅管，鍍鋅 管也有冷鍍鋅管和熱鍍鋅管，熱鍍鋅管因?yàn)楸Ｗo(hù)層致密均勻 、附著力強、穩定性比較好，目前仍大量應用。
Protective layer type (mainly refers to the inner wall of the pipeline) now has metal protective layer type and non-metal protective layer type, metal protective layer type commonly used surface protective layer type, surface laminated protective layer type. Galvanized pipes are commonly used in the protective coatings on the surface. Galvanized pipes also have cold galvanized pipes and hot galvanized pipes. Hot galvanized pipes are still widely used because of their compact and uniform protective coatings, strong adhesion and good stability. 標簽:
版權所有@轉載請注明：http://www.c831.cn/Knowledge.asp?id=2062
相關閱讀：目前的焊管價格接近焊管廠的現金成本
| 焊管市場和物流園區有什么不同? | 焊管市場是眾多市場中細分出來的一個市場
|
| |
|
| |
|
|
